🌐 EN

Floor Area Ratio Calculator

Calculate floor area ratio from total floor area and compare it to a selected percentage.

= 60.5 pyeong
= 121.0 pyeong
Floor Area Ratio
—
Maximum Total Floor Area — Remaining Buildable Area —

FAR Limits by Zoning District

Zoning District FAR Limit
Type 1 Residential50~100%
Type 2 Residential100~150%
General Residential Type 1100~200%
General Residential Type 2150~250%
General Residential Type 3200~300%
Quasi-Residential200~500%
Central Commercial400~1,500%
General Commercial300~1,300%
General Industrial200~350%

Inputs and checks

  • Enter Land Area (㎡) and Total Floor Area (All Floors) (㎡), using the summed areas of the floors you wish to compare.
  • Select Legal FAR Limit from 100% through 400%; the choice is a calculation reference and is not verified zoning permission.
  • Use Calculate to update or Reset for the initial inputs; area results include rounded pyeong equivalents.

Reading the result

  • Floor Area Ratio equals total floor area divided by land area times 100; the reference maximum equals land area times selected percent.
  • Remaining area may be negative. Neither the selected limit nor entered total area establishes legally counted floor area, exclusions, local zoning or permit eligibility.

Examples

Total floors below 200% reference

Input
Land Area (㎡): 200; Total Floor Area (All Floors) (㎡): 300; Legal FAR Limit: 200%.
Result
150.00%; 400.00 ㎡ (121.0 pyeong); 100.00 ㎡ (30.3 pyeong)
How to check it
300/200 × 100 = 150.00%; reference maximum 400 ㎡; remaining 100 ㎡.

Total floors above 200% reference

Input
Land Area (㎡): 100; Total Floor Area (All Floors) (㎡): 250; Legal FAR Limit: 200%.
Result
250.00%; 200.00 ㎡ (60.5 pyeong); -50.00 ㎡ (-15.1 pyeong)
How to check it
250/100 × 100 = 250.00%; reference maximum 200 ㎡; remaining -50 ㎡.

Frequently asked questions

Does the tool subtract floors excluded under law?
No. It uses the total area you entered without legal classification.
Can the result exceed 100%?
Yes. The combined floor area can exceed the land area.
Does the selected preset confirm zoning?
No. It supplies only the comparison percentage.