🌐 EN

🏗️ Building Coverage Ratio Calculator

Calculate Building Footprint to Land Area Ratio · Compare a building footprint with land area and a user-selected coverage percentage.

= 60.5 pyeong
= 36.3 pyeong
Coverage Ratio
—
Maximum Buildable Area — Remaining Buildable Area —

Coverage Ratio Limits by Zoning

Zoning District Coverage Limit
Type 1 Residential 50%
Type 2 Residential 50%
General Residential 1,2 60%
Type 3 Residential 50%
Quasi-Residential 70%
General Commercial 80%
General Industrial 70%
Natural Green Zone 20%

Inputs and checks

  • Enter Land Area (㎡) and Building Footprint (1st Floor Area) (㎡); land area must be positive for an ordinary ratio.
  • Select a percentage from Legal Coverage Ratio Limit, such as 60%; it is a user-selected comparison threshold, not a verified zoning entitlement.
  • Use Calculate to refresh or Reset to restore example inputs; areas show two decimals and pyeong equivalents one decimal.

Reading the result

  • Coverage Ratio is footprint ÷ land × 100. The reference maximum is land × selected percentage; remaining is maximum minus footprint and can be negative.
  • The comparison does not verify present zoning law, officially counted building area or building permission. The tool's preset values are not official determinations.

Examples

Below the chosen reference

Input
Land Area (㎡): 200; Building Footprint (1st Floor Area) (㎡): 100; Legal Coverage Ratio Limit: 60%.
Result
50.00%; 120.00 ㎡ (36.3 pyeong); 20.00 ㎡ (6.1 pyeong)
How to check it
100/200 × 100 = 50.00%; 200 × 0.60 = 120 ㎡; 120 - 100 = 20 ㎡.

Above the chosen reference

Input
Land Area (㎡): 100; Building Footprint (1st Floor Area) (㎡): 70; Legal Coverage Ratio Limit: 60%.
Result
70.00%; 60.00 ㎡ (18.2 pyeong); -10.00 ㎡ (-3.0 pyeong)
How to check it
70/100 × 100 = 70.00%; reference maximum 100 × 0.60 = 60 ㎡; remaining -10 ㎡.

Frequently asked questions

Does a green status mean my building is approved?
No. It only compares two entered numbers with your selected threshold.
Why is remaining area negative?
The building footprint exceeds the reference area computed from the chosen percentage.
Which pyeong conversion is used?
The area display uses 3.305785 square meters per pyeong.