🌐 EN

Dilution Concentration Calculator

Calculate Dilutions Using C₁V₁ = C₂V₂ — Solve for final volume, stock volume, or target concentration in an ideal dilution.

Final Volume (V₂)
—
Diluent to add —

The tool treats 1 ppm as approximately 1 mg/L only for dilute aqueous solutions. Do not use for non-ideal mixing, reactive or hazardous materials, or medical dosing; follow the SDS and procedure.

OSHA chemical hygiene · NIOSH acid/alkali controls · C₁V₁ reference

Inputs and checks

  • Choose Solve for: Final volume, Stock volume, or Target concentration.
  • Enter the three known positive quantities among Initial Concentration (C₁), Initial Volume (V₁), Final Concentration (C₂), and Final Volume (V₂).
  • For concentrations, choose ppm (parts per million), percent (%), or mg/L (milligrams per liter); for volumes, choose mL or L. Use the same concentration basis when comparing ppm and percent. The form converts selected units before calculating.
  • Keep the target no stronger than the stock and the final volume no smaller than the stock volume; press Calculate to update the missing field.

Reading the result

  • The solved value is written into its input rounded to four decimal places, and the result display uses up to four decimal places.
  • Diluent to add is final volume minus stock volume, shown in the selected final-volume unit.
  • The model assumes conserved solute and volumes that add together. Equating ppm with mg/L is approximate only for dilute water-based solutions with density close to water; percent and ppm must use the same concentration basis. A form reset may leave the last result visible.

Examples

Find final volume

Input
Solve for Final volume; C₁ = 1000 ppm; V₁ = 10 mL; C₂ = 100 ppm; final unit mL; Calculate
Result
Final volume: 100 mL; Diluent to add: 90 mL
How to check it
1000 × 10 divided by 100 gives 100 mL; subtract 10 mL to get 90 mL.

Find stock volume

Input
Solve for Stock volume; C₁ = 1 percent; C₂ = 100 ppm; V₂ = 1 L; V₁ unit mL; Calculate
Result
Stock volume: 10 mL; Diluent to add: 0.99 L
How to check it
1 percent is 10000 ppm under the model; 100 × 1000 divided by 10000 gives 10 mL. The difference is 990 mL, or 0.99 L.

Frequently asked questions

Can I mix liters and milliliters?
Yes. Select the unit beside each volume input.
Are ppm and mg/L always the same?
No. Their approximate match assumes a dilute solution with water-like density.
Does Reset always clear the result?
Not necessarily. The form resets, but the previous result can remain visible.
TRUST & SOURCES

Methodology and official sources

the dilution concentration calculation explains its inputs, assumptions, and calculation scope.

Official status
Reference calculator; it does not make an official determination.
Effective date
Last reviewed

Method

It applies C₁V₁ = C₂V₂ after compatible-unit normalization to the entered values.

Worked example

1,000 ppm × 10 mL = 100 ppm × 100 mL.

Limitations

  • Rates, rules, and individual circumstances can change the result.

Sources