🌐 EN

🔧 Engine Compression Ratio Calculator

Calculate a cylinder’s static compression ratio using swept and clearance volumes.

Static Compression Ratio
—
Swept Volume
— cc
Chamber + Gasket + Deck Total
— cc

Inputs and checks

  • Choose Metric (mm·cc) or Imperial (in·in³) and either Direct Entry for Swept Volume (the volume one piston sweeps through as it travels in one cylinder), or Calculate from Bore & Stroke for cylinder diameter and piston travel.
  • Enter Combustion Chamber Volume (required) and optionally Head Gasket Volume (optional) and Deck Clearance Volume (optional); blank optional volumes count as zero.
  • Use positive swept volume and a positive chamber plus gasket plus deck total. Unit switching converts current inputs with displayed rounding, and Calculate or input changes update the static ratio.

Reading the result

  • Static Compression Ratio is (swept volume + clearance volume) divided by clearance volume, displayed to one decimal as : 1. Clearance volume means the space left above the piston.
  • Swept Volume and Chamber + Gasket + Deck Total are displayed to two decimals in cc or three in in³. Bore and stroke calculate swept volume with π ÷ 4 × bore² × stroke.
  • This is static geometry only. It does not calculate effective running compression, combustion behavior, or compatibility with a particular engine.

Examples

Direct swept volume in cc

Input
Metric (mm·cc); Direct Entry; Swept Volume (per-cylinder displacement): 500 cc; Combustion Chamber Volume (required): 50 cc; Head Gasket Volume (optional): blank; Deck Clearance Volume (optional): blank
Result
Static Compression Ratio: 11.0 : 1; Swept Volume: 500.00 cc; Chamber + Gasket + Deck Total: 50.00 cc
How to check it
(500 + 50) ÷ 50 = 11.0.

Calculate swept volume from bore and stroke

Input
Metric (mm·cc); Calculate from Bore & Stroke; Bore (cylinder diameter): 80 mm; Stroke: 100 mm; Combustion Chamber Volume (required): 50 cc; Head Gasket Volume (optional): 5 cc; Deck Clearance Volume (optional): 5 cc
Result
Static Compression Ratio: 9.4 : 1; Swept Volume: 502.65 cc; Chamber + Gasket + Deck Total: 60.00 cc
How to check it
Swept volume = π ÷ 4 × 80² × 100 ÷ 1000 ≈ 502.65 cc; clearance = 50 + 5 + 5 = 60 cc; ratio rounds to 9.4 : 1.

Frequently asked questions

Is this ratio for the whole engine?
The inputs and calculation are for one cylinder, not the total engine displacement.
Can I leave gasket and deck fields empty?
Yes. Blank optional fields contribute zero to the clearance total.
Does it calculate dynamic compression ratio?
No. It uses static volume geometry only.