🌐 EN

Tile Installation Calculator

Estimate tile quantity and boxes from rectangular room and tile dimensions with a fixed waste allowance.

Room Area — Tiles Needed — Boxes Needed —

Tile Installation Info

Includes 10% extra for waste. Larger tiles install faster.

Inputs and checks

  • Enter Room Width (m) and Room Length (m) as positive meter measurements.
  • Enter Tile Width (cm) and Tile Length (cm) as positive centimeter measurements; the tile’s area is converted to square meters.
  • Enter Tiles per Box as a positive whole count when you want a box estimate.
  • The page recalculates when inputs change and has no Calculate button; area is shown to two decimals and tile/box counts as whole numbers.

Reading the result

  • Room Area is room width × room length; Tiles Needed rounds up the room-to-tile area ratio after adding a fixed 10% waste allowance.
  • Boxes Needed rounds tile count divided by Tiles per Box upward; when the box count input is zero, this result is a dash.
  • The source uses an area ratio rather than an actual tile layout; it does not calculate grout, cut patterns, tile strength or building approval.

Examples

Nine-square-meter room

Input
Room Width: 3 m; Room Length: 3 m; Tile Width: 30 cm; Tile Length: 30 cm; Tiles per Box: 10.
Result
Room Area: 9.00 ㎡; Tiles Needed: 110 tiles; Boxes Needed: 11 boxes
How to check it
Room area = 9.00 ㎡; tile area = 0.09 ㎡; 9 ÷ 0.09 × 1.10 = exactly 110 tiles, so no extra tile is added because of tiny computer rounding errors; 110 ÷ 10 = 11 boxes.

Twelve-square-meter room

Input
Room Width: 4 m; Room Length: 3 m; Tile Width: 50 cm; Tile Length: 50 cm; Tiles per Box: 8.
Result
Room Area: 12.00 ㎡; Tiles Needed: 53 tiles; Boxes Needed: 7 boxes
How to check it
Room area = 12.00 ㎡; 12 ÷ 0.25 × 1.10 = 52.8, rounded up to 53 tiles; 53 ÷ 8 rounded up = 7 boxes.

Frequently asked questions

Can I adjust the waste percentage?
No. This implementation applies a fixed 10% extra tile allowance.
Why is there no Calculate button?
The results update with input changes on this page.
Does it account for diagonal laying or cut layout?
No. The count comes from area arithmetic, not a placement plan.