🌐 EN

PPM Concentration Calculator

Convert between six concentration displays and calculate a simple dilution in a separate form.

Enter Concentration

Dilution Calculator (C₁V₁ = C₂V₂)

Common Concentration References

Item PPM PPB %
Tap Water Chlorine0.2 - 4.0200 - 4,0000.00002 - 0.0004
CO Safety Limit99,0000.0009
Alcohol Legal Limit300300,0000.03
Pool Chlorine1 - 31,000 - 3,0000.0001 - 0.0003

Inputs and checks

  • Enter a nonnegative value in any linked field: ppm means parts per million, ppb parts per billion, and ppt parts per trillion; % means parts per hundred, while mg/L and μg/L are milligrams and micrograms per liter. The other five fields update as you type.
  • PPM and mg/L show six decimal places, PPB, PPT, and μg/L show three, and Percent (%) shows eight.
  • The separate Dilution Calculator takes positive Initial Concentration (C₁), Initial Volume (V₁), and Final Concentration (C₂); press Calculate.
  • For a normal dilution, use matching concentration units, C₁ at least C₂ greater than zero, and a positive V₁; the dilution form does not convert volume units.

Reading the result

  • On the same concentration basis, the tool uses 1 ppm = 1000 ppb = 1000000 ppt and percent = ppm divided by 10000; it also treats 1 ppm as 1 mg/L and 1000 μg/L under its dilute-water approximation.
  • The dilution form shows Final Volume (V₂) and Water to Add with two decimal places, in the same volume unit entered for V₁.
  • ppm and mg/L are approximately equal only for dilute aqueous solutions with density close to water; percentages and parts-per-million values must describe the same concentration basis. There is no density input or chemical safety assessment.

Examples

Convert 100 ppm

Input
PPM (parts per million) = 100
Result
PPM: 100.000000; PPB: 100000.000; PPT: 100000000.000; Percent: 0.01000000; mg/L: 100.000000; μg/L: 100000.000
How to check it
Multiply ppm by 1000 for ppb and μg/L, by 1000000 for ppt, or divide by 10000 for percent.

Dilute ten volume units

Input
Initial Concentration (C₁) = 1000; Initial Volume (V₁) = 10; Final Concentration (C₂) = 100; press Calculate
Result
Final Volume: 100.00; Water to Add: 90.00
How to check it
1000 × 10 ÷ 100 gives 100 volume units; subtract the starting 10 to get 90.

Frequently asked questions

Do unit fields update as I type?
Yes. Enter one concentration and the linked fields change.
Is mg/L exactly ppm for every liquid?
No. The matching values assume dilute, water-like solutions.
What volume unit does the dilution form use?
It uses the same unit for starting volume, final volume, and water to add.