Select a frequency program and duration to operate the page’s local sound and visual timer settings.
🎯 Select Program
10 HzAlpha (Program Label)
00:00
💡 How Does This Timer Work?
This countdown timer offers six frequency presets at 10, 6, 15, 12, 20, and 3 Hz, with a duration of 1 to 60 whole minutes. When sound is enabled, the program generates two synthetic audio channels at 220 Hz and 220 Hz plus the selected preset frequency. Animated bars can be switched off separately. The moving sine-wave graph is generated by the program, not measured from brain activity.
📊 Preset Groups and Program Labels
Beta Preset Group (15 Hz, 20 Hz)
Includes the selectable 15 Hz and 20 Hz presets. Beta is a program label, not a measurement of a brain state.
Alpha Preset Group (10 Hz, 12 Hz)
Includes the selectable 10 Hz and 12 Hz presets. Alpha is a program label, not a measurement of a brain state.
Theta Preset Group (6 Hz)
Includes the selectable 6 Hz preset. Theta is a program label, not a measurement of a brain state.
Delta Preset Group (3 Hz)
Includes the selectable 3 Hz preset. Delta is a program label, not a measurement of a brain state.
⚠️ Check Display and Sound Options Before Starting
Avoid use if you have a history of epilepsy or photosensitive seizures. If you do not want changes in the brightness or height of the animated bars, or do not want synthetic sound, turn off the corresponding options before starting. The synthetic sine-wave graph continues moving even when both options are off. Press Stop to reset the countdown to 00:00 and stop the sound and animated bars. These controls do not provide a medical safety assessment or treatment recommendation.
Inputs and checks
Select a program such as 10 Hz Preset or 15 Hz Preset. Hz means cycles per second.
Set Duration (min) from 1 to 60 and choose whether to check "Enable Animated Bars" and "Enable Synthetic Sound".
Press Start to run the countdown. Stop ends the session and resets the visible timer to 00:00; there is no Pause or Resume control.
The visual switch affects the animated bars, not every moving graphic on the page. Sound playback depends on the device and audio settings.
Reading the result
The frequency display shows the selected preset value, such as 10 Hz or 15 Hz. The separate program label reads Alpha (Program Label) for 10 Hz and Beta (Program Label) for 15 Hz; these labels do not represent measured brain activity.
The countdown changes while running; after Stop it reads 00:00, and intermediate seconds depend on when you look.
The displayed programs are timer and stimulation settings, not a test or guarantee of concentration, learning, relaxation, or sleep improvement.
Examples
One minute with the 10 Hz preset and both effects off
Input
Uncheck Enable Animated Bars and Enable Synthetic Sound before starting. Select 10 Hz Preset, set Duration (min) to 1, press Start, then Stop.
Result
Frequency value: 10 Hz
Program label: Alpha (Program Label)
Start: 01:00
After one second: 00:59
Stop: 00:00
How to check it
The frequency value is 10 Hz, and the separate displayed label is Alpha (Program Label). One minute equals 60 seconds, so the countdown starts at 01:00 and reaches 00:59 after one second. Stop resets it to 00:00. The synthetic sine-wave graph can still move with both effects off.
Two minutes with the 15 Hz preset and both effects off
Input
Uncheck Enable Animated Bars and Enable Synthetic Sound before starting. Select 15 Hz Preset, set Duration (min) to 2, press Start, then Stop.
Result
Frequency value: 15 Hz
Program label: Beta (Program Label)
Start: 02:00
Stop: 00:00
Selected preset remains: 15 Hz Preset
How to check it
The frequency value is 15 Hz, and the separate displayed label is Beta (Program Label). Two minutes equals 120 seconds, so the countdown starts at 02:00. Stop resets the display to 00:00 but retains the selected preset, duration, and checkbox states. Starting again begins a new full two-minute countdown.
Frequently asked questions
Can I pause without resetting?
No. This page offers Start and Stop, and Stop resets the timer.
Does unchecking "Enable Animated Bars" stop all animation?
No. It switches off the visual bars, while a running session may still display the moving wave graphic.
Does a program measure how focused I am?
No. It supplies preset timing and frequency controls and does not measure attention.