🌐 EN

Calorie Calculator

Estimate adults' daily energy expenditure, goal-adjusted calories, macronutrient amounts and seven-day calorie patterns using body measurements, activity level and a selected BMR equation.

Goal Calories
—
Basal Metabolic Rate (BMR) — Total Daily Energy Expenditure (TDEE) —

Macronutrient Distribution

Carbs —
Protein —
Fat —

Zigzag Calorie Cycling

Two seven-day numerical variations of the calculated goal calories are shown. Option 1 uses smaller daily changes and Option 2 uses larger changes; each has an unrounded weekly average equal to the goal calories. The figures illustrate different daily distributions, not predicted health or weight outcomes.

Mon Tue Wed Thu Fri Sat Sun
Option 1 (Moderate Variation) — — — — — — —
Option 2 (Higher Variation) — — — — — — —
Weekly Avg: —

Inputs and checks

  • Choose a BMR equation: Mifflin–St Jeor, Harris–Benedict or Katch–McArdle. Mifflin–St Jeor uses 10 × weight (kg) + 6.25 × height (cm) − 5 × age (years), then adds 5 for the male selection or subtracts 161 for the female selection. This calculator's Harris–Benedict implementation uses 66 + 13.7 × weight + 5 × height − 6.8 × age for the male selection, or 655 + 9.6 × weight + 1.8 × height − 4.7 × age for the female selection.
  • Select male or female as the equation input and enter age in years, height in centimeters and weight in kilograms. The displayed numeric input ranges are age 1–120, height 50–250 cm and weight 20–300 kg. These interface ranges are not clinical eligibility criteria. The calculator is not designed to determine appropriate intake for children, pregnancy, breastfeeding or medical treatment.
  • Katch–McArdle reveals an optional body-fat percentage field with a displayed range of 5–50%. When body fat is greater than zero, the calculator estimates lean body mass as weight × (1 − body-fat percentage ÷ 100), then calculates BMR as 370 + 21.6 × lean body mass. If Katch–McArdle is selected without a positive body-fat value, the code falls back to Mifflin–St Jeor. The calculation does not independently enforce an upper body-fat limit.
  • Choose an activity factor: 1.2 for sedentary, 1.375 for lightly active, 1.55 for moderately active, 1.725 for very active or 1.9 for extra active. These are fixed multipliers, not measurements of exercise energy expenditure. The initial selection is 1.55.
  • Choose maintenance, one of three loss scenarios or one of two gain scenarios. Their daily arithmetic adjustments to estimated TDEE are respectively 0, −250, −500, −1,000, +250 and +500 kcal. The weekly kilogram descriptions are scenario labels rather than guaranteed rates or medically appropriate targets.
  • Choose balanced, low-carbohydrate or high-protein macronutrient distribution. Their carbohydrate/protein/fat energy shares are 50%/20%/30%, 30%/35%/35% and 40%/35%/25%. Balanced is the initial selection. These are preset calculation ratios, not individualized nutrition recommendations.

Reading the result

  • BMR is an equation-based estimate of resting energy expenditure. TDEE is calculated as unrounded BMR × the selected activity factor, and goal calories equal unrounded TDEE plus the selected daily adjustment. All displayed calorie values are rounded to whole kcal.
  • The macronutrient display converts the selected shares of goal calories into grams using 4 kcal/g for carbohydrate, 4 kcal/g for protein and 9 kcal/g for fat. Each gram value is rounded separately to the nearest whole gram, so reconstructing calories from the displayed grams may produce a small rounding difference. Macronutrient composition and overall nutritional adequacy require consideration beyond these three totals.
  • For a nonzero daily goal adjustment, the time indicator calculates weeks per 1 kg as 7,700 ÷ (absolute daily adjustment × 7), displayed to one decimal place. A −500 kcal daily adjustment therefore displays 2.2 weeks/kg. This is a fixed energy-arithmetic scenario, not an expected completion date: metabolic adaptation, changing energy expenditure and other factors can alter actual outcomes. Maintenance hides this indicator.
  • The existing warning is triggered when calculated goal calories are below 1,200 kcal for the female selection or below 1,500 kcal for the male selection. These numbers are software warning thresholds, not clinically validated safe minimum intakes. No warning does not establish that a result is suitable or safe, and the calculation does not prevent negative or otherwise implausible outputs.
  • Zigzag option 1 displays Monday through Sunday as goal, goal +100, goal −100, goal +200, goal −200, goal +300 and goal −300 kcal. Option 2 uses offsets of 0, +200, −200, +400, −400, +500 and −500 kcal. Both patterns have an unrounded seven-day average equal to goal calories; displayed daily figures are rounded independently. The table remains available even if the optional charts fail to load.
  • The calculator recalculates when supported fields change or the Calculate button is used. If height or weight parses to zero or less, calculation stops without clearing the previous result. Age and body-fat values are not fully validated by the calculation routine. Always check the current inputs before interpreting displayed results; a retained result or an implausible number is not a usable dietary plan.
  • Food energy is commonly expressed in kilocalories (kcal); 1 kcal equals 1,000 small calories (cal). The calculated values are estimates based on equations and selected inputs, not measurements of actual energy expenditure or metabolism.

Examples

Default maintenance estimate

Input
Male; age 30 years; height 170 cm; weight 70 kg; Mifflin–St Jeor; moderately active (1.55); maintain weight; balanced distribution.
Result
Goal: 2,507 kcal; BMR: 1,618 kcal; TDEE: 2,507 kcal; carbohydrate: 313 g; protein: 125 g; fat: 84 g. The time indicator and low-calorie warning are hidden.
How to check it
BMR = 10 × 70 + 6.25 × 170 − 5 × 30 + 5 = 1,617.5 kcal. TDEE = 1,617.5 × 1.55 = 2,507.125 kcal. Maintenance adjustment = 0, so goal = 2,507.125 kcal. Carbohydrate = 2,507.125 × 0.50 ÷ 4 ≈ 313 g; protein = 2,507.125 × 0.20 ÷ 4 ≈ 125 g; fat = 2,507.125 × 0.30 ÷ 9 ≈ 84 g. Display values are independently rounded.

Katch–McArdle with a −500 kcal scenario

Input
Same default profile and activity factor; change formula to Katch–McArdle, enter body fat 20%, and select the loss scenario labeled 0.5 kg/week. Keep balanced distribution.
Result
Goal: 1,948 kcal; BMR: 1,580 kcal; TDEE: 2,448 kcal; carbohydrate: 244 g; protein: 97 g; fat: 65 g; time: 2.2 weeks/kg. The low-calorie warning is hidden.
How to check it
Estimated lean body mass = 70 × (1 − 20 ÷ 100) = 56 kg. BMR = 370 + 21.6 × 56 = 1,579.6 kcal. TDEE = 1,579.6 × 1.55 = 2,448.38 kcal. Goal = 2,448.38 − 500 = 1,948.38 kcal. Carbohydrate = 1,948.38 × 0.50 ÷ 4 ≈ 244 g; protein = 1,948.38 × 0.20 ÷ 4 ≈ 97 g; fat = 1,948.38 × 0.30 ÷ 9 ≈ 65 g. Time scenario = 7,700 ÷ (500 × 7) = 2.2 weeks/kg after rounding. The label does not establish an actual rate of weight loss.

Frequently asked questions

How many calories should I eat to lose, maintain or gain weight?
The calculator first estimates TDEE from BMR and activity. It then applies 0 kcal/day for maintenance, −250, −500 or −1,000 kcal/day for the three loss scenarios, or +250 or +500 kcal/day for the gain scenarios. These adjustments explain how the displayed number is produced; they do not identify a suitable intake or guarantee a corresponding weekly weight change. The existing 1,200/1,500 kcal warning rules are not certified safety floors.
What is the difference between BMR and TDEE, and which equation is used?
BMR estimates the energy needed for basic functions at rest. TDEE is the selected BMR estimate multiplied by an activity factor between 1.2 and 1.9. The available equations are Mifflin–St Jeor, Harris–Benedict and Katch–McArdle. Katch uses estimated lean body mass when a positive body-fat percentage is supplied; otherwise this calculator uses the Mifflin–St Jeor fallback. None of these results directly measures your metabolism.
How are the macronutrient amounts calculated?
The calculator offers balanced (50% carbohydrate, 20% protein, 30% fat), low-carbohydrate (30%/35%/35%) and high-protein (40%/35%/25%) distributions by energy. Carbohydrate and protein use 4 kcal per gram, and fat uses 9 kcal per gram. All three displayed gram values are rounded individually. The presets illustrate numerical distributions rather than prescribing a nutritionally complete diet.
Do the estimated weeks per kilogram and zigzag schedule predict weight-loss results?
No. The time display divides an assumed 7,700 kcal per kilogram by the weekly absolute calorie adjustment, reporting weeks per 1 kg rather than a date for reaching a specified target weight. The two zigzag options simply rearrange calorie figures across Monday–Sunday while preserving the same unrounded weekly average. Neither predicts weight change nor demonstrates prevention of a metabolic plateau. If a required height or weight is invalid, earlier outputs may remain visible.