🌐 EN

3D Printing Cost Calculator

Estimate a per-item 3D printing quote from entered production costs, failure rate, markup, and quantity.

Planning estimate only. Measure material use and machine power for your own printer before quoting a customer.

Inputs and checks

  • Choose Material type and Currency first, then enter Quantity as a whole number of at least 1 and Material amount per item in grams. Filament and Resin identify the selected material but use the same cost formula.
  • Enter Material price per kg, Print time per item (hours), Average printer power (W), and Electricity price per kWh in the selected currency. Enter Printer depreciation per hour and both active labor inputs separately.
  • Enter Expected failure rate (%) and Markup (%) from 0 up to but not including 100, plus Post-processing per finished item. Failure reserve accounts for repeated attempts rather than multiplying the attempt cost by the failure percentage alone.
  • Press Calculate after changing numeric entries. Selectable currency changes the displayed money format, not an exchange rate.

Reading the result

  • Production cost combines one attempt, expected failed attempts, and finishing; Suggested quote adds Markup (%) to production cost. Markup on cost is different from gross profit margin.
  • Total suggested quote multiplies the per-item quote by Quantity. Currency formatting may round displayed amounts, and these figures do not establish actual profit or market prices.

Examples

Two filament items with material cost only

Input
Currency: USD; Material type: Filament; Material amount per item (g): 100; Material price per kg: 10; Print time per item (hours): 0; Average printer power (W): 0; Electricity price per kWh: 0; Printer depreciation per hour: 0; Active labor per attempt (hours): 0; Labor rate per hour: 0; Expected failure rate (%): 0; Post-processing per finished item: 0; Markup (%): 20; Quantity: 2; Press Calculate.
Result
Material type: Filament; Currency: USD; Material: $1.00; Power: $0.00; Depreciation: $0.00; Labor: $0.00; Failure reserve: $0.00; Post-processing: $0.00; Production cost: $1.00; Markup: $0.20; Suggested quote: $1.20; Total suggested quote (2): $2.40.
How to check it
100 g / 1,000 × $10/kg = $1.00 per attempt; 20% markup is $0.20, giving $1.20 per item and $2.40 for two.

Three resin items with a 50% failure rate

Input
Currency: USD; Material type: Resin; Material amount per item (g): 200; Material price per kg: 10; Print time per item (hours): 2; Average printer power (W): 100; Electricity price per kWh: 0.5; Printer depreciation per hour: 0.5; Active labor per attempt (hours): 1; Labor rate per hour: 5; Expected failure rate (%): 50; Post-processing per finished item: 1; Markup (%): 0; Quantity: 3; Press Calculate.
Result
Material type: Resin; Currency: USD; Material: $2.00; Power: $0.10; Depreciation: $1.00; Labor: $5.00; Failure reserve: $8.10; Post-processing: $1.00; Production cost: $17.20; Markup: $0.00; Suggested quote: $17.20; Total suggested quote (3): $51.60.
How to check it
Attempt cost is $2.00 + $0.10 + $1.00 + $5.00 = $8.10. A 50% failure rate adds $8.10 × 0.5 / (1 − 0.5) = $8.10 in expected failure reserve; $8.10 + $8.10 + $1.00 = $17.20 per item.

Frequently asked questions

Does selecting Resin change the amount of material used?
No. Material type is shown in the results, while the calculation uses your entered grams and price per kilogram.
Why is the failure reserve not simply half the attempt cost at a 50% failure rate?
The calculation estimates repeated attempts: attempt cost × failure rate / (1 − failure rate). At 50%, the reserve equals one attempt cost.
Does Markup (%) mean gross profit margin?
No. Markup is added as a percentage of production cost, so the quoted price and profit margin are not the same percentage.