Enter Duct Diameter (mm) as a positive inner diameter of a circular duct.
Enter Air Velocity (m/s) as a positive air speed through that cross-section.
The Cross Section and Air Flow (CMH) results update as inputs change; there is no Calculate button. CMH means cubic meters of air per hour.
Reading the result
Cross Section is the round opening area π × (diameter ÷ 2000)², displayed to four decimals in ㎡.
Air Flow (CMH) multiplies that area by velocity and 3600, then displays two decimals. Blank or zero inputs show dashes.
Only round duct geometry is supported; pressure loss, fan selection, and ventilation compliance are not calculated. Negative inputs are not consistently blocked, so use positive measurements.
Examples
200 mm duct at 5 m/s
Input
Duct Diameter (mm): 200; Air Velocity (m/s): 5
Result
Cross Section: 0.0314 ㎡; Air Flow (CMH): 565.49 CMH
How to check it
π × (0.2 ÷ 2)² ≈ 0.0314159 ㎡; multiply by 5 × 3600 to get 565.49 CMH.
100 mm duct at 2 m/s
Input
Duct Diameter (mm): 100; Air Velocity (m/s): 2
Result
Cross Section: 0.0079 ㎡; Air Flow (CMH): 56.55 CMH
How to check it
π × (0.1 ÷ 2)² ≈ 0.00785398 ㎡; multiply by 2 × 3600 to get 56.55 CMH.
Frequently asked questions
What does CMH mean?
CMH is cubic meters per hour, a volume-flow rate.
Can I enter a rectangular duct?
No. This tool assumes a circular cross-section.
Can I size a fan from this answer alone?
No. The model excludes resistance and pressure losses.