🌐 EN

🪨 Gravel Calculator

Estimate rectangular gravel volume, weight, and optional cost for a selected material.

Volume needed
— m³
Weight needed
— t

Inputs and checks

  • Select Metric for Length and Width in meters and Depth in centimeters, or Imperial for lengths in feet and depth in inches. Use positive dimensions.
  • Choose Material type, such as Gravel (general), Crushed stone, or Pea gravel. Each choice uses a built-in approximate density, not a moisture- or compaction-tested value.
  • Optionally enter Price per metric ton (optional) or Price per US ton (optional), in the currently selected unit basis; changing unit systems converts dimensions but does not convert the entered price between ton bases.

Reading the result

  • Volume needed is rectangular area times depth, displayed to two decimals in m³ or yd³. Weight needed applies the material density and displays two decimals in metric tonnes or US short tons.
  • Estimated cost appears only for a positive entered price and is shown to at most two decimal places. The page has no live material price.
  • Material density is a site approximation; moisture and compaction can change real delivered weight.

Examples

Half a cubic meter of general gravel

Input
Metric; Length: 5 m; Width: 2 m; Depth: 5 cm; Material type: Gravel (general); Price per metric ton (optional): 100
Result
Volume needed: 0.50 m³; Weight needed: 0.84 metric tonnes; Estimated cost: 84
How to check it
5 × 2 × 0.05 = 0.50 m³; 0.50 × 1.68 = 0.84 tonnes; 0.84 × 100 = 84.

Larger gravel bed

Input
Metric; Length: 10 m; Width: 2 m; Depth: 10 cm; Material type: Gravel (general); Price per metric ton (optional): 100
Result
Volume needed: 2.00 m³; Weight needed: 3.36 metric tonnes; Estimated cost: 336
How to check it
10 × 2 × 0.10 = 2.00 m³; 2.00 × 1.68 = 3.36 tonnes; 3.36 × 100 = 336.

Frequently asked questions

Why does the weight change with Material type?
The tool multiplies volume by the approximate density associated with the selected material. Some materials share the same value, such as Gravel (general) and River rock at 1.68 t/m³, so changing the material does not always change the estimated weight.
Does switching Imperial also convert my price per ton?
No. Re-enter the price for a US ton because the existing price value is not rebased automatically.
What happens if I leave the price empty?
Volume and weight still calculate; the cost figure is not shown unless the price is positive.