🌐 EN

Bike tire pressure reference

Explore a model-based bicycle tire pressure estimate from total loaded weight, tire width, front load percentage, and surface selection. The calculator applies a built-in heuristic to produce separate front and rear values. Its coefficients are model assumptions, not manufacturer-validated pressure recommendations or a substitute for checking tire and rim specifications.

Bike tire pressure reference

These are heuristic model outputs, not manufacturer-approved inflation instructions. Check both tire and rim specifications and stay within all applicable pressure limits. The calculation does not verify equipment compatibility or riding conditions.

Source: SRAM — Tire Pressure Guide ·

Inputs and checks

  • Enter total loaded weight in kilograms, including the rider, bicycle, and carried load. Do not enter rider weight alone if the other weight is part of the load.
  • Enter tire width in millimeters. The calculation uses a minimum denominator value of 20 mm through its internal width handling.
  • Enter the front load percentage. The model clamps this input to a range of 25% to 55%, with the remaining percentage assigned to the rear.
  • Choose Road, Gravel, or MTB. These surface selections apply built-in factors of 1, 0.75, and 0.45 respectively; they do not assess actual route or weather conditions.

Reading the result

  • The baseline pressure is calculated as B = (total weight in kg × 1.45 ÷ max(20, tire width in mm)) × 10 × surface factor.
  • Front pressure is calculated from the baseline multiplied by the front load fraction divided by 0.5. Rear pressure uses the remaining load fraction in the same calculation.
  • The calculator displays whole PSI and one-decimal BAR values. BAR is derived using 14.5038 PSI per BAR. Display rounding does not imply that this is an appropriate inflation precision.
  • The coefficients form a built-in heuristic, not a manufacturer-approved universal pressure rule. The output does not verify tire, rim, hookless, or tubeless compatibility, pressure limits, loading, terrain, or weather.
  • Check the marked pressure ranges and instructions for both your tire and rim, and use an appropriate pressure gauge. Never inflate beyond an applicable limit because of this model's output.

Examples

Road surface with a 40% front load

Input
Total loaded weight: 82 kg; tire width: 28 mm; front load: 40%; surface: Road.
Result
Front: 34 PSI / 2.3 BAR. Rear: 51 PSI / 3.5 BAR.
How to check it
Baseline: 82 × 1.45 ÷ 28 × 10 × 1 = 42.4642857 PSI. Front: 42.4642857 × 0.40 ÷ 0.50 = 33.9714 PSI. Rear: 42.4642857 × 0.60 ÷ 0.50 = 50.9571 PSI. The displayed values are rounded model outputs, not inflation instructions.

Gravel surface with a 45% front load

Input
Total loaded weight: 80 kg; tire width: 32 mm; front load: 45%; surface: Gravel.
Result
Front: 24 PSI / 1.7 BAR. Rear: 30 PSI / 2.1 BAR.
How to check it
Baseline: 80 × 1.45 ÷ 32 × 10 × 0.75 = 27.1875 PSI. Front: 27.1875 × 0.45 ÷ 0.50 = 24.46875 PSI. Rear: 27.1875 × 0.55 ÷ 0.50 = 29.90625 PSI. The displayed values are rounded model outputs, not inflation instructions.

Frequently asked questions

Are these universal bicycle tire pressure recommendations?
No. The calculator uses a heuristic with built-in coefficients. Tire and rim designs differ, and there is no single pressure recommendation suitable for every bicycle and setup.
Should I follow the calculated number if it exceeds a component limit?
No. Check the applicable marked limits and manufacturer instructions for both tire and rim. Do not exceed either component's allowable pressure based on this calculator.
Why are front and rear pressures different?
The model allocates the entered total load according to the selected front percentage and assigns the remainder to the rear. It then calculates separate estimates from those proportions.
Does the surface selection account for every riding condition?
No. Road, Gravel, and MTB select fixed model factors. The calculator does not inspect actual surfaces, weather, tire construction, equipment compatibility, or riding conditions.