🌐 EN

Ideal Weight Calculator

Compare four traditional weight-estimation formulas and a height-based BMI reference interval. Results are illustrative estimates, not individual healthy-weight targets or medical guidance.

Average Estimated Weight
—
Arithmetic mean of 4 formulas

Formula Comparison

Robinson (1983) —
Miller (1983) —
Devine (1974) —
Hamwi (1964) —
BMI Reference Interval —
BMI-Based Reference Interval
— — —
Comparison With BMI Interval
—

About the Estimation Formulas

Devine (1974): Historical height-based formula using sex-specific baseline weights and an increment of 2.3 kg per additional inch.

Robinson (1983): Alternative height-based estimate with sex-specific coefficients.

Miller (1983): Alternative estimate using different baseline weights and height increments.

Hamwi (1964): Traditional height-based weight-estimation formula.

BMI Reference Interval: Weight interval calculated using BMI values of 18.5 to 25; not an individualized health assessment.

Inputs and checks

  • Select Male or Female as the formula category, enter age in years and height in centimeters, and optionally enter current weight in kilograms.
  • The interface specifies ages 2–80 and heights of 100–250 cm, although the calculation code checks only age 2–80 and height greater than zero. The optional weight field displays a 20–300 kg range; these interface limits do not establish medical suitability.
  • All four formulas use different coefficients for the selected sex category. Age is checked for eligibility but does not change the calculated weights. The formulas do not measure body frame, fat, muscle or bone structure.
  • The formulas were developed primarily as adult reference estimates. Although the code accepts children from age two, its adult-style calculations and BMI interval are not appropriate for pediatric assessment.
  • Below 152.4 cm, the formulas extrapolate backward from their baseline. Estimates for very tall people, athletes, pregnant people and those with particular health conditions also need caution.

Reading the result

  • Robinson (1983), Miller (1983), Devine (1974) and Hamwi (1964) each begin with a sex-specific weight at 152.4 cm and adjust it for every additional or fewer 2.54 cm. They use different starting weights and increments, so their estimates differ.
  • For males, the baseline weights are 52, 56.2, 50 and 48 kg, with respective increments of 1.9, 1.41, 2.3 and 2.7 kg per inch. For females, the baselines are 49, 53.1, 45.5 and 45.5 kg, with increments of 1.7, 1.36, 2.3 and 2.2 kg.
  • The prominent result is the arithmetic mean of the four unrounded estimates, displayed to one decimal place. Averaging does not validate a personal ideal weight or establish that the mean is more clinically accurate.
  • The separate BMI interval uses 18.5 times height in meters squared through 25 times height in meters squared. These are fixed reference boundaries, not an individualized diagnosis or prescription.
  • When a positive current weight is entered, the status compares it with the unrounded BMI interval and shows a difference rounded to one decimal place, or a within-range message. Without a positive current weight, status is shown as a dash.
  • Outputs are displayed in kilograms to one decimal place, using the active number-formatting locale. If age is outside 2–80 or height is not positive, the script returns without clearing earlier results, which may therefore be stale.
  • Neither BMI nor these formulas assesses waist circumference, body composition, health history or individual risks. Clinical care may consider these separately. Do not use this calculator for medication dosing, ventilator settings, pediatric growth assessment or treatment decisions.
  • For weight-management questions, discuss personal circumstances and any proposed changes with a qualified healthcare professional rather than treating a displayed figure, a fixed weekly loss rate or a BMI category as a guaranteed healthy goal.

Examples

Male, age 30, height 170 cm

Input
Male; 30 years; 170 cm; current weight left blank.
Result
Average 65.9 kg; Robinson 65.2 kg; Miller 66.0 kg; Devine 65.9 kg; Hamwi 66.7 kg; BMI interval 53.5 kg - 72.2 kg; status —.
How to check it
Height increment = (170 - 152.4) / 2.54 = 6.9291 inches. The four unrounded estimates are averaged before rounding. BMI endpoints are 18.5 × 1.70² = 53.465 kg and 25 × 1.70² = 72.25 kg; JavaScript rounding displays 53.5 kg and 72.2 kg.

Female, age 30, height 160 cm

Input
Female; 30 years; 160 cm; current weight 60 kg.
Result
Average 53.9 kg; Robinson 54.1 kg; Miller 57.2 kg; Devine 52.4 kg; Hamwi 52.1 kg; BMI interval 47.4 kg - 64.0 kg; status within the BMI reference interval.
How to check it
Height increment = (160 - 152.4) / 2.54 = 2.9921 inches. Average the four female formula estimates, then round once to one decimal. BMI endpoints are 18.5 × 1.60² = 47.36 kg and 25 × 1.60² = 64 kg. The entered 60 kg lies between the unrounded endpoints.

Frequently asked questions

Which ideal weight formula is most accurate?
No single formula, or the average of all four, is established here as the most accurate personal target. Robinson, Miller, Devine and Hamwi use different historical coefficients, so comparing their outputs illustrates model variation rather than clinical certainty.
Is ideal body weight better than BMI?
They describe different estimates. These IBW equations use height and a sex category to produce weights; BMI relates weight to height squared. Neither directly measures body fat or reliably determines an individual's health, and comparing both does not eliminate their limitations.
Can I use the result for children or medication doses?
No. Even though the script accepts ages from two years, it applies adult-style formulas and fixed BMI boundaries. Children need age- and sex-appropriate growth assessment. Medication doses and other clinical settings require professional, context-specific calculations.
Why did my result not change after I edited an input?
The script skips recalculation when age is outside 2–80 or height is zero or negative, leaving previously displayed values visible. Check your inputs and calculate again; an unchanged result after invalid entry must not be interpreted as a new estimate.