🌐 EN

🌡️ Feels-Like Temperature Calculator

Estimate how temperature, relative humidity and wind speed combine to produce a calculated feels-like temperature, while distinguishing the result from official heat warnings and WBGT.

Estimated feels-like temperature
—
—
Approximate heat index (not WBGT) — Wind Chill —

Inputs and checks

  • Choose metric inputs in degrees Celsius and kilometres per hour, or imperial inputs in degrees Fahrenheit and miles per hour. Enter the values in the fields for the selected unit system.
  • The page provides separate input fields for metric units (°C and km/h) and imperial units (°F and mph). Switching between the two sets does not automatically convert or copy the values you entered. Check the fields in the currently selected unit system before calculating.
  • Enter relative humidity as a percentage between 0 and 100. Humidity is used both in the approximate heat-index calculation and in choosing the feels-like calculation: the heat-index branch is selected when air temperature is at least 27 °C and relative humidity is at least 40%.
  • Temperature is checked against a Celsius-equivalent input range of -50 °C to 60 °C. Missing numeric values may be interpreted as zero, so enter all intended values explicitly. If temperature or humidity is outside its valid range, a new calculation may not replace the previous result. Check your entries and do not treat an earlier result as a new calculation.
  • Enter wind speed as a number in the currently selected unit. Check that the value and unit are correct before calculating. This tool does not verify whether your entries match current weather observations.

Reading the result

  • Feels-like temperature is selected using the calculator's own conditions: the approximate heat index is used when air temperature is at least 27 °C and relative humidity is at least 40%; otherwise, the wind-chill calculation is used when its cold-weather conditions are met. In other cases, the actual air temperature is used.
  • The heat-index estimate is an approximation. The implementation uses the Rothfusz regression at raw temperatures of at least 80 °F and a simpler expression below that threshold. It does not implement every preliminary-selection rule or the low- and high-humidity adjustments of the complete National Weather Service calculator.
  • The wind-chill calculation is applied only when the temperature is at or below 10 °C and wind speed is greater than 4.8 km/h. Outside those conditions, the wind-chill result remains the actual air temperature.
  • All calculated temperature results are displayed in Celsius to one decimal place, including when you enter imperial values. The seven temperature-category labels are determined by actual air temperature, not by the calculated feels-like temperature or a clinical risk assessment.
  • Hot- and cold-weather information panels are also triggered by actual air-temperature bands. They are explanatory interface messages, not personalized safety assessments or official weather alerts.
  • The calculator does not retrieve live weather data or account for solar radiation, direct sunlight, physiological differences or exposure duration. It does not calculate Wet Bulb Globe Temperature (WBGT). Check current official local weather information for actual conditions and applicable warnings.

Examples

Warm air with moderate humidity

Input
Air temperature: 30 °C; Relative humidity: 60%; Wind speed: 15 km/h; Units: Metric.
Result
Estimated feels-like temperature: 32.8 °C. Approximate heat index: 32.8 °C. Wind-chill result: 30.0 °C. Actual-temperature category: 27 °C to below 32 °C.
How to check it
The temperature and humidity satisfy the calculator's heat-index selection conditions because the temperature is at least 27 °C and humidity is at least 40%. The approximate heat-index calculation therefore supplies the feels-like result of 32.8 °C. The wind-chill calculation is not applied because the air temperature is above 10 °C, so its displayed reference value is 30.0 °C.

Higher temperature and humidity

Input
Air temperature: 32 °C; Relative humidity: 70%; Wind speed: 0 km/h; Units: Metric.
Result
Estimated feels-like temperature: 40.4 °C. Approximate heat index: 40.4 °C. Wind-chill result: 32.0 °C. Actual-temperature category: 32 °C to below 38 °C.
How to check it
The temperature is at least 27 °C and relative humidity is above 40%, so the calculator selects its approximate heat-index result. The resulting estimate is 40.4 °C. The wind-chill calculation is not applicable at this air temperature, so its result remains the actual temperature of 32.0 °C. The category continues to reflect the actual 32 °C input, rather than the higher feels-like estimate.

Frequently asked questions

Is the heat-index result an official weather warning?
No. It is an approximate calculation using this tool's implementation. It is not a complete National Weather Service heat-index calculator, an official alert or an individualized assessment. Consult current official local weather information for warnings.
Why can the feels-like temperature be higher than the actual temperature?
The calculator may select its approximate heat-index calculation when temperature and humidity meet its selection conditions. That estimate can be higher than the entered air temperature. It remains a model result, not a direct measurement.
Why does changing between metric and imperial units not preserve my entries?
No. The page has separate metric and imperial input fields. Switching between them does not automatically convert or copy your current values. Check the fields in the selected unit system before calculating.
Does this calculator measure WBGT or account for direct sunlight?
No. It does not include solar radiation, direct sunlight, physiological factors or exposure duration, and it does not calculate WBGT. Use an appropriate official weather or heat-stress resource when those factors matter.