🌐 EN

Presentation Timer

Set a talk length and slide count to estimate time per slide and rehearse with a timer.

Time Per Slide
—
Actual Presentation Time — Break Time (minutes) —
Rehearsal timer
00:00
Slide 1 Remaining 00:00

Inputs and checks

  • Enter Total Time in minutes (1 or more) and the number of slides (1 or more). Defaults are 30 and 20.
  • Enter Break Time in minutes, from 0 up to but not including Total Time. It is deducted before allocation.
  • Change inputs or select Calculate. Start, Pause and Reset control the separate rehearsal clock.

Reading the result

  • Time per slide is the usable minutes divided by slide count, rounded to whole seconds. Actual Time excludes breaks.
  • The clock starts at 00:00 and counts elapsed time; Pause holds it and Reset sets elapsed time back to zero.
  • The timer advances at roughly one-second intervals and can drift if the browser slows. Break time is deducted, not scheduled as a timed pause.

Examples

No break

Input
Total 30 min; 20 slides; break 0 min; timer fresh before Start
Result
1min 30sec per slide; actual 30 min; break 0 min; clock 00:00; slide 1; remaining 30:00.
How to check it
30 minutes divided by 20 slides gives 90 seconds per slide.

Five-minute break allowance

Input
Total 20 min; 10 slides; break 5 min; timer fresh before Start
Result
1min 30sec per slide; actual 15 min; break 5 min; clock 00:00; slide 1; remaining 15:00.
How to check it
20 minus 5 is 15 usable minutes; 15 divided by 10 is 1.5 minutes.

Frequently asked questions

Does the break start automatically?
No. Break minutes are subtracted from the available speaking time.
Can I pause the rehearsal?
Yes. Pause keeps elapsed time; Start resumes and Reset clears the clock.
Does it check how fast I speak?
No. It divides minutes by slides without reading your script.