๐ŸŒ EN

๐Ÿ“š Book Spine Calculator

Estimate a printed book spine and full-cover layout dimensions.

Final Spine Width
โ€”
Paper Information
Single Page Thickness โ€” Total Paper Thickness โ€” Cover Thickness โ€” Recommended Binding โ€”
Cover Design Specifications
Front/Back Cover Each โ€” Cover Height โ€” Spine Design Width โ€” Total Cover Width (Spread) โ€”

๐Ÿ“ 3mm bleed included

BACK
SPINE
FRONT
Design Guide
๐Ÿ’ก Spine width varies by paper type and page count
๐Ÿ’ก Allow extra margin for spine width in cover design
๐Ÿ’ก Actual thickness may vary depending on binding method

Inputs and checks

  • Choose a book-size preset in millimeters or enter custom width and height of at least 50 mm.
  • Enter pages starting at 4 in steps of 4; the initial count is 200.
  • Select paper thickness from 0.10 to 0.28 mm and cover thickness of 0.3 or 2.5 mm.
  • Press Calculate or change inputs; Reset returns to the initial choices.

Reading the result

  • Spine thickness is half the page count times sheet thickness, plus cover thickness.
  • The cover layout uses a fixed 3 mm bleed on each side; it is an estimate, not a printing specification.
  • Spine and spread width display 2 decimals in mm; paper thickness uses 3. Binding labels are broad page-count hints only.

Examples

Estimate a 200-page A5 book

Input
Size: 148 ร— 210 mm; pages: 200; paper: 0.125 mm; cover: 0.3 mm
Result
Spine 12.80 mm; paper stack 12.50 mm; design spine 18.80 mm; cover 154.0 ร— 216.0 mm; spread width 326.80 mm
How to check it
200 pages make 100 sheets: 100 ร— 0.125 + 0.3 = 12.80 mm; spread width is 154 ร— 2 + 18.80.

Estimate a thinner 100-page A5 book

Input
Size: 148 ร— 210 mm; pages: 100; paper: 0.10 mm; cover: 0.3 mm
Result
Spine 5.30 mm; paper stack 5.00 mm; design spine 11.30 mm; cover 154.0 ร— 216.0 mm; spread width 319.30 mm
How to check it
100 pages make 50 sheets: 50 ร— 0.10 + 0.3 = 5.30 mm; spread width is 154 ร— 2 + 11.30.

Frequently asked questions

Why is the sheet count half the pages?
Each physical sheet has two numbered sides.
Can I choose a different bleed?
No. The tool adds 3 mm on each relevant edge.
Is the suggested binding method required?
No. Check the actual printer and paper requirements.